IMPROVEMENT OF GRANULAR MATERIAL WITH TYPE MH CEMENT AND FINE AGGREGATES OF BEACH SAND FROM THE COAST IN THE MANABÍ PROVINCE

Authors

  • Morales-Hidalgo Johanna Patricia Departamento de Construcciones Civiles, Facultad de Ciencias Matemáticas, Físicas y Químicas. Universidad Técnica de Manabí, UTM. Portoviejo, Ecuador.
  • Ortiz-Hernández Eduardo Humberto Departamento de Construcciones Civiles, Facultad de Ciencias Matemáticas, Físicas y Químicas. Universidad Técnica de Manabí, UTM. Portoviejo, Ecuador.
  • Intriago-Álava Carlos Igor Departamento de Construcciones Civiles, Facultad de Ciencias Matemáticas, Físicas y Químicas. Universidad Técnica de Manabí, UTM. Portoviejo, Ecuador.

Keywords:

Sea sand, Granular sub-base, Granulometry, California Bearing Ratio (CBR), Type MH Cement

Abstract

The present investigation was developed with the purpose of characterizing the sea sands of the beaches located in the coastal profile of the province of Manabí, to determine if it is feasible to combine it with sub-base type granular material, fulfilling the specification of INEN standards for civil works projects. The sea sand studied underwent granulometry, natural humidity and specific gravity tests to later combine it granulometrically with the sub-base type granular material from a quarry located in the canton of Montecristi. The dosage to stabilize the sub-base was developed using 10% sea sand from Puerto Cayo adding 3, 4 and 5% Holcim Base Vial Type MH cement. To analyze the mechanical behavior of this type of mixtures, Modified Proctor and CBR (California Bearing Ratio) tests were carried out, which allowed us to show favorable results regarding the resistant capacity of the sub-base type granular material, since by adding 10% of sea sand from Puerto Cayo and 5% MH type cement, the CBR of the quarry granular material, significantly increased reaching values from 33.2% to 150%.

Keywords: Sea sand, Granular sub-base, Granulometry, California Bearing Ratio (CBR), Type MH Cement.

References

ASTM C127. (2016). Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate. West Conshohocken, PA.: ASTM International. doi: 10.1520/C0127-15

ASTM C131. (2020). Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine. West Conshohocken, PA.: ASTM International. doi: 10.1520/C0131M-20

ASTM C136. (2020). Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates. West Conshohocken, PA.: ASTM International. doi:10.1520/C0136_C0136M-19

ASTM C33. (2018). Standard Specification for Concrete Aggregates (Vol. 4.02). West Conshohocken, PA.: ASTM International. doi:10.1520/C0033_C0033M-18

ASTM C88. (2018). Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate. West Conshohocken, PA.: ASTM International. doi: 10.1520/C0088_C0088M-18

ASTM D1557. (2021). Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). West Conshohocken, PA.: ASTM International. doi: 10.1520/D1557-12R21

ASTM D1883. (2021). Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils. West Conshohocken, PA.: ASTM International. doi: 10.1520/D1883-21

ASTM D2216. (2019). Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass. West Conshohocken, PA.: ASTM International. doi: 10.1520/D2216-19

Bahamondes, R., Echaveguren, T., & Vargas-Tejeda, S. (2013). Análisis de métodos de diseño de pavimentos de adoquines de hormigón. Revista de la construcción, 12(3), 17-26.

Flores Córdova, C. (2015). William Araujo, egresado de Ingeniería Civil, sustento investigación sobre ecuaciones con propiedades de suelos para Piura. Universidad de Piura.

Holcim Ecuador S.A. (n.d.). Soluciones en cemento. Holcim Base Vial. Guayaquil.

Lascano Cabrera, S. D., & Návarez Sanchez, L. A. (2010). Mejoramiento de la capacidad portante del CBR de una sub base granular con material proveniente de la provincia de Esmeraldas por medio de la adición de desechos de PVC [Tesis Ingeniería Civil, PUCE]. Repositorio de Tesis de Grado y Posgrado, Quito.

MOP, M. D. (2002). Especificaciones Generales para la Construcción de Caminos y Puentes.

NTE INEN 691. (1982). Mecánica de Suelos. Determinación del límite líquido. Método de Casagrande. Instituto Ecuatoriano de Normalización.

NTE INEN 692. (1982). Mecánica de Suelos. Determinación del límite plástico. Instituto Ecuatoriano de Normalización.

NTE INEN 696. (2011). Áridos. Análisis granulométrico en los áridos, fino y grueso. Instituto Ecuatoriano de Normalización.

NTE INEN 860. (2011). Áridos. Determinación del valor de la degradación del árido grueso de partículas menores a 37.5 mm mediante el uso de la máquina de los ángeles. Instituto Ecuatoriano de Normalización.

NTE INEN 861. (2011). Instituto Ecuatoriano de Normalización.

NTE INEN 863. (2011). Áridos. Determinación de la solidez de los áridos mediante el uso de sulfato de sodio o de sulfato de magnesio. Instituto Ecuatoriano de Normalización.

Panchana, R. A., Ortiz, E. H., Ruiz, W. E., & Calderero, M. J. (2020). Fuentes de arena de río de la Provincia de Manabí a utilizar en hormigones en la construcción de obras civiles. REVISTA RIEMAT, 5(1).

Pinard, M. I., Paige-Green, P., Mukura, K., & Motswagole, K. J. (2013). Guideline on the Use of Sand in Road Construction in the SADC Region. AFCAP/GEN/028/C.

Ruiz Brito, C. A. (2011). Análisis de los factores que producen el deterioro de los pavimentos rígidos. [Tesis Carrera de Ingeniería Civil, ESPE]. DSpace Repository, Sangolquí.

Sanjuan, L. M. (2021). ¿Cómo se generan las playas, cuál es el proceso y por qué la arena es tan fina? AS Actualidad.

Zambrano Meza, M. I., & Tejeda Piusseaut, E. (2019). Materiales granulares tratados con emulsión asfáltica para su empleo en bases o subbases de pavimentos flexibles. Revista de Arquitectura e Ingeniería, 13(3), 1-11.

Published

2023-02-27

How to Cite

Morales-Hidalgo, J. P., Ortiz-Hernández, E. H., & Intriago-Álava, C. I. (2023). IMPROVEMENT OF GRANULAR MATERIAL WITH TYPE MH CEMENT AND FINE AGGREGATES OF BEACH SAND FROM THE COAST IN THE MANABÍ PROVINCE. Scientific Journal INGENIAR: Engineering, Technology and Research, 6(11 Ed. esp.), 2-15. Retrieved from https://journalingeniar.org/index.php/ingeniar/article/view/109